2017年6月19日星期一

Synthesized Signal Generators TFG3630

Synthesized Signal Generators
TFG3630
TFG3630 synthesized signal generators with PLL technique and use the FPGA  to control screen display and output, with excellent technical performances and powerful function which are necessary for the experimental detection circuit and device detection. Large color LCD interface can show a variety of working parameters. Keypads and knob are convenient for operation.
China Digital Multimeters 
China Frequency Characteristic Analyzer
China Frequency Counter
Features
Frequency resolution: 3Hz
Unlimited measurement range: digital setting directly for the whole range.
Non-intergraded process: up to the stable value immediately when switching, continuous signal phase and amplitude without deflection.
Sweep characteristics: with the function of frequency sweep and power sweep. Start point and stop point can be set arbitrarily.
Modulation characteristics: pulse modulation signal with user-defined can be output.
Operation mode: key operation, TFT-LCD interface, direct digital setting, continuous adjustment by knob.
High reliability: large scale integrated circuit, SMT, high reliability and long service life.
Communication port: USB device , RS232 and GPIB (optional)
tfg3630Specifications
Frequency 
Range25MHz~3GHz
Resolution3Hz
Accuracy±5ppm
Stability1×10-7
Reference FrequencyReference Output:
Frequency: 10MHz
Level: >0dBm
Port: BNC connector

Reference Input:
Frequency: 10MHz
Power: -3~+7dBm
Input Port: BNC connector
Impedance(nominal): 50Ω
Phase Noise-90dBc~-115dBc Offset20 kHz
SpuriousHarmonic: <-35dBc (Power: ≤-5dBm)
Non-harmonic: <-60dBc
Amplitude
Power Range-60dBm~+10dBm
Resolution0.25dB
Accuracy±(1.0+2% absolute value of setting value)dB
(output frequency 25MHz~2250MHz)
±(1.0+4%  absolute value of setting value)dB
(output frequency 2250MHz~3000MHz)
Input SWR (Standing-wave Ratio)< 1.5 typical value
RF OutputTerminal: N type
Output Impedance: 50Ω
Pulse Modulation
Break-make Ratio> 80dB
Rising/Falling Time< 100ns
Pulse Width0.25s  Min.
Pulse Period0.5s  Min.
Sweep
Frequency SweepSweep Mode: Linear
Min. Step: 3Hz
Power SweepSweep Mode: Linear
Min. Step: 0.25dBm
General Characteristics
DisplayResolution: 480×272
Size: 4.3 inch
LanguageChinese and English
PowerVoltage: 200V ~ 240V
Frequency: 50(1±5%) Hz
Power Consumption: <20W
Warm-up: 30 minutes
Environment and DimensionsWorking Temperature: +10°C ~ +40 °C
Storage Temperature: -40°C~ +70 °C
Relative Humidity: ≤80%
Weight: <5 kg approx.
Dimension: 386mm×256mm×123mm (Length × Width × height)

没有评论:

发表评论

How to Measure Adjacent Channel Power with a Spectrum Analyzer?

Adjacent channel power, as the name suggests, measures the power of the left and right channels (also known as upper and lower channels) adj...